Delta Electronics ASDA-A2 Series - Page 394

Chapter 8 Servo Parameters
Revision January 2011 8-149
P5 - 68 POV8 Moving Speed Setting of Position 8 Address: 0588H, 0589H
Default: 1000.0 Related Section:
Applicable Control Mode: PR Section 7.10
Unit: 0.1 r/min
Range: 0.1 ~ 6000.0
Data Size: 16-bit
Display Format: Decimal
P5 - 69 POV9 Moving Speed Setting of Position 9 Address: 058AH, 058BH
Default: 1300.0 Related Section:
Applicable Control Mode: PR Section 7.10
Unit: 0.1 r/min
Range: 0.1 ~ 6000.0
Data Size: 16-bit
Display Format: Decimal
P5 - 70 POV10 Moving Speed Setting of Position 10 Address: 058CH, 058DH
Default: 1500.0 Related Section:
Applicable Control Mode: PR Section 7.10
Unit: 0.1 r/min
Range: 0.1 ~ 6000.0
Data Size: 16-bit
Display Format: Decimal
P5 - 71 POV11 Moving Speed Setting of Position 11 Address: 058EH, 058FH
Default: 1800.0 Related Section:
Applicable Control Mode: PR Section 7.10
Unit: 0.1 r/min
Range: 0.1 ~ 6000.0
Data Size: 16-bit
Display Format: Decimal
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com