Need help?Do you have a question about the Delta Electronics DVP-ES2 Series and is the answer not in the manual?
General| Model/Series | DVP-ES2 Series |
|---|---|
| Category | Controller |
| Input Voltage | 24V DC |
| Digital I/O | Yes |
| Built-in I/O | Yes |
| Extension I/O | Yes |
| Communication Ports | RS-232, RS-485 |
| Program Capacity/Memory | 16k Steps |
| Operating Temperature | 0°C to 55°C |
| High-speed Counters | Yes |
| CPU Type | 32-bit |
| Input Type | Sink/Source |
| Output Type | Relay/Transistor |
| I/O Points | Up to 256 |
| Programming Language | Ladder Logic |
| High-Speed Pulse Input | 10kHz |
| Analog I/O | Optional |
Instructions for PLC mounting and terminal wiring best practices.
Essential information on AC power input, safety circuits, and protection.
Explains SINK and SOURCE modes for DC input signals.
Diagrams and instructions for wiring relay outputs.
To Next Page
