Need help?Do you have a question about the Delta Electronics AC Motor Drive VFD-EL and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Control Method | V/F control |
| IP Rating | IP20 |
| Humidity | Less than 90% RH (non-condensing) |
| Output Voltage | 0 to Input Voltage |
| Overload Capacity | 150% for 60 seconds |
| Braking Unit | Built-in |
| Protection Functions | Over voltage, Over current, Under voltage, Over temperature, Short circuit |
| Communication | RS-485 (Modbus) |
| Digital Output | 1 (Relay output) |
| Analog Output | 1 (0 to 10 VDC) |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C ~ +60°C |
| Altitude | 1000m (Derating required above 1000m) |
| Input Voltage | 1-phase 200 ~ 240VAC, 3-phase 200 ~ 240VAC, 3-phase 380 ~ 480VAC |
| Output Frequency | 0.1 to 600 Hz |
| Power Range | 0.2 kW ~ 3.7 kW |
| Digital Inputs | 5 programmable digital inputs |
| Analog Input | 2 (0-10V, 4-20mA) |
Explains the fundamental principles and precautions for connecting wires to the AC motor drive's terminals.
Details the causes and troubleshooting steps for over-current faults in the AC motor drive.
Provides troubleshooting guidance for ground fault issues, including checking output circuits and grounding.
Outlines steps to diagnose and resolve over-voltage conditions, including checking DC bus voltage and deceleration settings.
Guides users through troubleshooting low voltage faults, checking input power, and ensuring proper voltage specifications.
Addresses overheating issues by guiding checks on heatsink temperature, cooling fan, and ambient conditions.
Provides troubleshooting steps for overload faults, including checking motor loading and parameter settings.
Offers solutions for issues related to an abnormal or non-functional keypad display on the AC motor drive.
Details troubleshooting procedures for phase loss faults, focusing on wiring and input voltage checks.
Provides a comprehensive flowchart for diagnosing why the motor is not running, covering keypad, inputs, and settings.
Offers troubleshooting steps for issues where the motor speed cannot be adjusted as expected.
Guides users through diagnosing and resolving motor stalling issues during the acceleration phase.
Provides troubleshooting steps when the motor's performance deviates from the expected operation.
To Next Page
