Need help?Do you have a question about the Delta Electronics DVP-SS2 and is the answer not in the manual?
General| Model | DVP-SS2 |
|---|---|
| Type | PLC |
| Input Voltage | 24V DC |
| Communication Ports | RS-232, RS-485 |
| Programming Language | Ladder Logic |
| Operating Temperature | 0°C to 55°C |
| Humidity | 5% to 95% (non-condensing) |
| Output Type | Relay |
| Storage Temperature | 70°C |
Mounting the PLC using M4 screws directly to the product dimension.
Mounting the PLC onto a 35mm DIN rail using the retaining clip.
Details on the DC power supply requirements and behavior for the DVP-SS2 PLC.
Equivalent circuit for input point wiring in DC signal SINK mode.
Equivalent circuit for input point wiring in DC signal SOURCE mode.
Wiring diagrams and explanations for relay output circuits.
Wiring diagrams and explanations for transistor output circuits.
To Next Page
