Delta Electronics VFD-DD Series - Page 100

Chapter 4 Parameter Settings|DD Series
4-76
10 User-defined Parameters This parameter can be set during operation.

Start-up Display Selection
Control mode VF VFPG SVC FOCPG TQCPG FOCPM
Factory setting: #. ##
Display address 0003

Maximum Operation Frequency
Control mode VF VFPG SVC FOCPG TQCPG FOCPM
Factory setting: #. ##
Display address 0131

Motor Rated Frequency
Control mode VF VFPG SVC FOCPG TQCPG FOCPM
Factory setting: #. ##
Display address 0132

Motor Rated Voltage
Control mode VF VFPG SVC FOCPG TQCPG FOCPM
Factory setting: #. ##
Display address 0133

2nd Output Frequency (Mid-point frequency)
Control mode VF VFPG SVC FOCPG TQCPG FOCPM
Factory setting: #. ##
Display address 0134

2nd Output Voltage (Mid-point voltage)
Control mode VF VFPG SVC FOCPG TQCPG FOCPM
Factory setting: #. ##
Display address 0135

3rd Output Frequency (Mid-point frequency)
Control mode VF VFPG SVC FOCPG TQCPG FOCPM
Factory setting: #. ##
Display address 0136

3rd Output Voltage (Mid-point voltage)
Control mode VF VFPG SVC FOCPG TQCPG FOCPM
Factory setting: #. ##
Display address 0137

4th Output Frequency (Low Frequency)
Control mode VF VFPG SVC FOCPG TQCPG FOCPM
Factory setting: #. ##
Display address 0138

4th Output Voltage (Low Voltage)
Control mode VF VFPG SVC FOCPG TQCPG FOCPM
Factory setting: #. ##
Display address 0139