Delta Electronics VFD-DD Series User Manual

Chapter 3 Keypad and Startup |DD Series
3-3
3-2 Keypad Descriptions
Descriptions of Digital Keypad Outlook
Enter Key
STOP/RESET Key
Program/Function
LED Display
Door Open
Door Close
UP/DOWN Key
LED Indicates
Power Indicates
Close Door/Open Door Key
Displays output frequency, current,
Fault Indicate
Door Close Complete
Door Open Complete
To stops and resets the parameter
a fter fa ul t o cc urs
To read or modify drive's parameters
all parameter settings and fault content
Displ ay AC drive 's status an d se tting
Select and change parameters
Descriptions of Display Items
Display Message Descriptions
Displays the AC drive Master Frequency.
Displays the actual output frequency present at the motor.
User defined unit (where U = F x Pr.0-04)
Displays the output current present at terminals U/T1, V/T2, and W/T3.
Display counting value
Display the selected parameter
Displays the actual stored value of the selected parameter.
External Fault.
Display “End” for approximately 1 second if input has been accepted and
saved automatically.
Display “Err”, if the input is invalid.
How to Operate the Digital Keypad
START
GO START
Selection Mode
To set parameters
Parameter setting complete.
Parameter setting error
MODE NOTE: In the p arameter setting mode , user can return to MODE se le cti on by pr es s ing .
MODE
MODE
ENTE R
.

Delta Electronics VFD-DD Series Specifications

General

Brand	Delta Electronics
Model	VFD-DD Series
Category	Garage Door Opener
Language	English