To Next PageTo Next Page
Need help?Do you have a question about the Delta Elektronika SM300-10D and is the answer not in the manual?
General| Output Voltage | 0-300 V |
|---|---|
| Output Current | 0-10 A |
| Power Rating | 3000 W |
| Current Programming Accuracy | 0.1% + 5mA |
| Current Readback Accuracy | 0.1% + 5mA |
| Power Factor | ≥0.95 |
| Operating Temperature | 0-50 °C |
| Storage Temperature | -40°C to +70°C |
| Relative Humidity | non-condensing |
| Protections | Overvoltage, Overcurrent, Overtemperature |
| Communication Interface | RS232, USB, Ethernet (optional) |
Essential safety precautions for operating and servicing the power supply.
Ensuring proper safety grounding for AC power connections.
Guidelines for safe grounding of DC output terminals.
Warning regarding potential electric shock hazards.
Using external analog voltage to program output.
Connecting multiple units in series for higher voltage.
Connecting multiple units in parallel for higher current.
Configuration for controlling multiple units.
Protection against excessive output voltage.
Step-by-step guide for initial unit setup.
Using analog signals for voltage and current control.
Remote programming via digital communication interfaces.
Controlling shutdown and trip functions externally.
Configuring units for series operation using adapters.
Configuring units for parallel operation.
Advanced configurations combining series and parallel modes.
Diagnosing and resolving problems where there is no output.
Troubleshooting issues with programming control.
Troubleshooting issues in master/slave parallel configurations.
Diagnosing when output voltage exceeds the set value.
Systematic checks for major unit failures.
Calibrations required after specific repairs.
