To Next PageTo Next Page
Need help?Do you have a question about the Delta Elektronika SM30-100D and is the answer not in the manual?
General| Output Voltage | 0 - 30 V |
|---|---|
| Output Current | 0 - 100 A |
| Power Rating | 3000 W |
| Type | Programmable DC Power Supply |
| Efficiency | > 90% |
| Cooling | Fan |
| Protections | Overvoltage, Overcurrent, Overtemperature |
Covers essential safety warnings, grounding, connection, fuses, ratings, live circuits, and part substitution guidelines.
Details installation category, grounding of AC and DC terminals, and mains connection procedures.
Describes the output modes (constant voltage/current) and overload protection features.
Details analog and IEEE488/RS232 programming capabilities for voltage and current control.
Covers allowed series operation up to 600V and parallel operation without limitations.
Explains Master/Slave features for forming larger units and programming via master.
Details remote sensing for constant load voltage and the Over Voltage Protector (OVP) function.
Guides on initial unit setup, cable connections, potentiometers, and OVP setting.
Instructions for programming voltage and current using external analog sources.
Details programming and status reading via IEEE488 or RS232 interfaces.
Explains controlling output via remote shutdown and implementing an over current trip.
Instructions for connecting units in series using the Master/Slave Series Adapter.
Provides general guidance for contacting support and preparing for repairs.
A checklist for diagnosing serious failures, including checking fuses and output diodes.
Declaration of conformity for Electromagnetic Compatibility and Electrical Safety according to EU directives.
