Delta-q IC650 - Page 25

25
Figure 31. Insert the USB ash drive to begin the charge data download process. This step can be completed us-
ing the same USB ash drive programmed to update the charger’s software. The process is completed when the
USB indicator is solid green, and no longer ashing.
9.3 Charge Tracking Data
All IC650 Chargers record data such as amp hours returned, charge cycle completion or interruption, and the
charge prole being used. This data can be very useful in vehicle or machine diagnostics, and can be viewed
using the IC650 Programmer and Data Analysis Tool, available from Delta-Q.
To retrieve this data, follow these steps:
1. After a charge cycle is complete, or the charger is disconnected from the battery pack, insert a USB ash
drive with at least 2MB of free space into the IC650 Charger’s USB host port. The charger will automatical-
ly begin to download the data, shown on the Fault / Error / USB Indicator with a ashing green light.
If you plan to download data from a large number of chargers, having more free space on your USB ash
drive is recommended. If you want to update the software on only some of your chargers, it is recommend-
ed that you use separate USB ash drives for updating and downloading charge tracking data.
2. The downloading process is complete when the Fault / Error / USB Indicator is solid green. The USB ash
drive can be removed from the charger.