Delta-q IC650 - IC650 DC Output Connections & Specs

29
IC650 Specifications
Options
OEM-specic AC, DC & signal cords Customized cords to suit OEM requirement, factory-installed for OEM convenience
AC cord p/n 900-0063: 2m (6.5’) 14AWG IEC320-NEMA5/15
Isolated battery temperature sensor p/n 900-0056
3m (9.8’) bare wires
p/n 900-0059
0.14m (5.5”) bare wires
p/n 900-0060
1.2m (47.2”) bare wires
Tri-color remote status indicator p/n 900-0058: Remote LED, 3m (9.8’) shielded bare wires, tri-color red / yellow / green
IC series handle & rubber feet kit p/n 900-0111: Handle, rubber feet and associated mounting hardware
Special Features
Charging prole selection Up to 25 charging proles stored on the charger. Button and LED numeric display allows default charging prole
to be selected.
Datalogging Flash memory for logging charge cycle parameters (V, I, T, Ah returned, charge duration), events and diagnostic
information.
Service No custom service tools needed. USB ash drive used to update charger software, load charging proles, select
default charge prole and download charge tracking and diagnostic information.
External communications PC-based conguration software for eld programmability.
IC650 BASE (Rear View)
IC650 COMM (Rear View)
Close-up view of battery
temperature sense and interlock
blade terminals within DC output
block.