Delta-Q Technologies
QuiQ Charger Troubleshooting Flow Chart
Does the
Charger Turn
On?
Disconnect charger from batteries
and connect to AC Power
Yes
No
Ensure 90-
260VAC at
Charger Input
Does the
Charger Turn
On?
Yes
No
Check for correct algorithm
number (refer to manual for
procedure)
Charger Input Failure -
Return Unit
Does the
algorithm
match the
batteries?
Change algorithm to correct
setting for batteries.
No
Connect charger to batteries
and plug charger into AC.
Yes
Does the
Red LED indicate
a fault?
Is the
interlock
functioning? (if
used)
Note that the interlock is not
functioning and return
charger
Charger is OK
Yes
Yes
No
Refer to troubleshooting guide to try and resolve
problem. If problem persists make note of the
problem and return charger
No
Is there
excessive boiling or
other odd behaviour
while charging?
No
Yes
https://harrissupplyind.com - To Order Parts Call 608-268-8080
To Next Page
Loading...
Need help?
General
