Page 3 of 11
Copyright © 2021 Delta-Q Technologies Corp
ORIGINAL SAFETY AND OPERATING INSTRUCTIONS
This manual is for the Delta-Q Technologies RC Series (900, 1000, & 1200) Industrial Battery Chargers.
Read and comprehend this document fully before handling or working with any RC Series battery
chargers. Important safety, operating, and installation instructions are included. As well, this manual
includes a link to a list of fault codes and error codes that help engineers take steps quickly to resolve
issues.
Read this information in its entirety before using your Delta-Q Technologies charger. Save these
instructions.
For technical support, contact the manufacturer or distributor of your vehicle or machine, as their version
of this charger may require unique operating instructions. For additional product documentation, see
www.delta-q.com/resources.
Warning
Use the charger only with a charging algorithm that is appropriate to the specific battery type
and capacity. Other usage may cause personal injury and damage. Lead acid batteries may generate
explosive hydrogen gas during normal charging. Keep sparks, flames, and smoking materials away from
batteries. If this charger is used with lithium-ion type batteries, an integrated battery management
system (BMS) must be used. The BMS must ensure that, in all operating modes, the battery cells are
protected from inappropriate levels of voltage, current, temperature, and state of charge. Do not operate
the charger in a closed-in area or restrict ventilation. Never charge a frozen or non-rechargeable battery.
Observe all battery manufacturers’ precautions (e.g., maximum charge rates and if cell caps should be
removed while charging).
Danger
Risk of electric shock. Connect charger power cord to an AC outlet that has been properly
installed and grounded in accordance with all local codes and ordinances. A grounded AC outlet is
required to reduce the risk of electric shock—do not use ground adapters or modify the plug. Do not
touch uninsulated portions of the output connector or uninsulated battery terminals. Disconnect the AC
supply before making or breaking the connections to the battery. Do not open or disassemble the
charger. Do not operate this charger if the AC supply cord or DC output cord is damaged or if the charger
has received a sharp blow, been dropped, or is damaged in any way. Refer all repair work to the
manufacturer or qualified personnel. This charger is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and knowledge on electrical
systems and battery charging, unless they have been given supervision or instruction concerning use of
the charger by a person responsible for their safety. Children should be supervised to ensure they do not
play with the charger.
To Next Page
Loading...
Need help?
General
