To Next PageTo Next Page
Need help?Do you have a question about the Delta 36-850 and is the answer not in the manual?
Crucial safety warnings and guidelines to prevent injury and property damage.
Defines safety alert symbols (Danger, Warning, Caution) and their implications.
Explains the necessity and procedure for grounding the machine for operator safety.
Details the steps for mounting the feeder bracket onto a table saw, jointer, or shaper.
Explains how to connect the support assembly to the main feeder unit.
Explains how to adjust the feed rate using gear arrangements.
Details how to position the feeder assembly on a jointer for optimal use.
Outlines the correct placement of the feeder on a shaper.
Crucial safety warnings and guidelines to prevent injury and property damage.
Defines safety alert symbols (Danger, Warning, Caution) and their implications.
Explains the necessity and procedure for grounding the machine for operator safety.
Details the steps for mounting the feeder bracket onto a table saw, jointer, or shaper.
Explains how to connect the support assembly to the main feeder unit.
Explains how to adjust the feed rate using gear arrangements.
Details how to position the feeder assembly on a jointer for optimal use.
Outlines the correct placement of the feeder on a shaper.
General| Type | Table Saw |
|---|---|
| Blade Size | 10 inches |
| Motor | 15 Amp |
| Voltage | 120V |
| Max Rip Right | 30 inches |
| Max Rip Left | 12 inches |
| Max Cut Depth at 90 degrees | 3-1/8 inches |
| Max Cut Depth at 45 degrees | 2-1/4 inches |
| No-Load Speed | 5000 RPM |
| Arbor Size | 5/8 inches |
