To Next PageTo Next Page
Need help?Do you have a question about the Delta 43-355 and is the answer not in the manual?
Key safety rules covering guards, tools, environment, apparel, securing work, and maintenance.
Guidelines for safe operation, including avoiding forcing, using the right tool, and proper feed direction.
Vital warnings about staying alert, not leaving the machine unattended, and dust hazards.
Rules for initial setup, advice, wiring, guards, and workspace cleanliness.
Guidelines for cutter maintenance, fence adjustment, securing workpieces, and feed direction.
Rules for safe operation, disconnections, and cleaning the machine before leaving.
Advises using a separate electrical circuit for the machine with appropriate protection.
Critical warning against exposing the machine to rain or operating in damp locations.
Mandates grounding to protect operators from electric shock hazards.
Guidance on using correct outlets and adapters, emphasizing professional installation.
Guidelines for choosing and using appropriate 3-wire extension cords of correct gauge.
Introduces the Delta Model 43-355 wood shaper and its key features.
Provides instructions for unpacking the machine and cleaning protective coatings.
Details initial unpacking steps, including handling the double-sided spindle assembly.
Step-by-step guide for assembling the shaper's stand and attaching panels.
Instructions for attaching the front panel, rubber grommet, and bottom shelf.
Details on attaching the switch arm to its bracket for machine control.
Instructions for attaching the fence assembly to the shaper table securely.
Explains how to install the table inserts for accommodating various cutter sizes.
Guides for installing the spindle guard and critical 'keyed' washer for safety.
Instructions on securing the shaper to a stable surface to prevent tipping during operation.
Details how to adjust the spindle height using the lock knob and handwheel.
Explains the start/stop switch function and how to lock the switch in the OFF position.
Describes how to reposition the switch arm for optimal user convenience.
Information on reversing spindle rotation and a caution against doing so while running.
Explains the motor's overload protection and the procedure to reset it.
Guides for adjusting fence segments and halves for accurate shaping.
Procedure for changing spindle speeds by adjusting belt tension and pulley steps.
Detailed procedure for swapping the spindle assembly between its 1/2" and 3/4" ends.
Instructions for installing a new drive belt onto the spindle and motor pulleys.
Steps to check and align the motor pulley with the spindle for proper belt tracking.
Instructions for safely and effectively shaping workpieces using the fence as a guide.
Rules for good work and safety when shaping with collars and the starting pin.
Discusses the different positions for using collars relative to the cutter(s).
Explains the use of the tapered starting pin for cut initiation and safety warnings.
Warns about potential hazards of using accessories not manufactured by Delta.
Information on obtaining parts, service, and warranty support from Delta.
Outlines the terms and conditions of the two-year limited warranty for Delta products.
Lists contact information and locations for Delta service centers in the US and Canada.
Lists various trademarks associated with Porter-Cable and Delta products.
Key safety rules covering guards, tools, environment, apparel, securing work, and maintenance.
Guidelines for safe operation, including avoiding forcing, using the right tool, and proper feed direction.
Vital warnings about staying alert, not leaving the machine unattended, and dust hazards.
Rules for initial setup, advice, wiring, guards, and workspace cleanliness.
Guidelines for cutter maintenance, fence adjustment, securing workpieces, and feed direction.
Rules for safe operation, disconnections, and cleaning the machine before leaving.
Advises using a separate electrical circuit for the machine with appropriate protection.
Critical warning against exposing the machine to rain or operating in damp locations.
Mandates grounding to protect operators from electric shock hazards.
Guidance on using correct outlets and adapters, emphasizing professional installation.
Guidelines for choosing and using appropriate 3-wire extension cords of correct gauge.
Introduces the Delta Model 43-355 wood shaper and its key features.
Provides instructions for unpacking the machine and cleaning protective coatings.
Details initial unpacking steps, including handling the double-sided spindle assembly.
Step-by-step guide for assembling the shaper's stand and attaching panels.
Instructions for attaching the front panel, rubber grommet, and bottom shelf.
Details on attaching the switch arm to its bracket for machine control.
Instructions for attaching the fence assembly to the shaper table securely.
Explains how to install the table inserts for accommodating various cutter sizes.
Guides for installing the spindle guard and critical 'keyed' washer for safety.
Instructions on securing the shaper to a stable surface to prevent tipping during operation.
Details how to adjust the spindle height using the lock knob and handwheel.
Explains the start/stop switch function and how to lock the switch in the OFF position.
Describes how to reposition the switch arm for optimal user convenience.
Information on reversing spindle rotation and a caution against doing so while running.
Explains the motor's overload protection and the procedure to reset it.
Guides for adjusting fence segments and halves for accurate shaping.
Procedure for changing spindle speeds by adjusting belt tension and pulley steps.
Detailed procedure for swapping the spindle assembly between its 1/2" and 3/4" ends.
Instructions for installing a new drive belt onto the spindle and motor pulleys.
Steps to check and align the motor pulley with the spindle for proper belt tracking.
Instructions for safely and effectively shaping workpieces using the fence as a guide.
Rules for good work and safety when shaping with collars and the starting pin.
Discusses the different positions for using collars relative to the cutter(s).
Explains the use of the tapered starting pin for cut initiation and safety warnings.
Warns about potential hazards of using accessories not manufactured by Delta.
Information on obtaining parts, service, and warranty support from Delta.
Outlines the terms and conditions of the two-year limited warranty for Delta products.
Lists contact information and locations for Delta service centers in the US and Canada.
Lists various trademarks associated with Porter-Cable and Delta products.
General
