Delta 34-184 - User Manual

INSTRUCTION MANUAL
Tenoning Jig
(Model 34-184)
WRITERS NOTE: FOR TUPELO PRODUCT REMOVE WORD MODEL.
PART NO. 901660 - 02-21-02
Copyright © 2002 Delta Machinery
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call
1-800-223-7278 (In Canada call 1-800-463-3582).

Summary

General Safety Rules

Additional Safety Rules for Tenoning Jig

Product Introduction

Unpacking and Cleaning Guide

Tenoning Jig Assembly Instructions

Assembly for Left Tilting Arbor Saws

Procedure to adapt the tenoning jig for use with left tilting arbor saws.

Adjusting Guide Bar to Table Slot

Aligning the Tenoning Jig

Tenoning Jig Adjustments

Work Support Plate Adjustments

Guide to rapid, fine, and tilt adjustments for the work support plate.

Backstop Angle Adjustment

Steps to set the backstop angle for precise tenon cuts.

Tenoning Jig Operation

Mortise and Tenon Joint Structure

Defines the components and terminology of mortise and tenon joints.

Cutting Tenon Shoulders

Detailed instructions for performing shoulder cuts on tenons.

Mortise and Tenon Joint Examples

Parts List and Identification

Available Accessories

Parts, Service, and Warranty Assistance

Delta 34-184 Specifications

General

Brand	Delta
Model	34-184
Category	Tools
Language	English