To Next PageTo Next Page
Need help?Do you have a question about the Delta VERSA-FEEDER 36-865 and is the answer not in the manual?
Warning about chemicals in dust from power sanding, sawing, grinding, drilling.
Details the machine's voltage, frequency, and current rating.
Explains proper grounding procedures for electrical safety.
Lists items included and instructions for unpacking and initial cleaning.
Lists required tools and provides an estimated assembly duration.
Details the main controls and how to adjust them.
Explains how to change the variable feed speeds of the stock feeder.
Describes how to switch between forward, reverse, and neutral feed directions.
Instructions for attaching a vacuum hose to the dust chute.
Positioning the feeder on a table saw for optimal use.
Positioning the feeder on a jointer for optimal use.
Guide for checking and replacing motor brushes.
Contact info for parts, service, warranty, and accessory information.
Contact and location details for service centers across the USA.
Contact and location details for service centers in Canada.
Warning about chemicals in dust from power sanding, sawing, grinding, drilling.
Details the machine's voltage, frequency, and current rating.
Explains proper grounding procedures for electrical safety.
Lists items included and instructions for unpacking and initial cleaning.
Lists required tools and provides an estimated assembly duration.
Details the main controls and how to adjust them.
Explains how to change the variable feed speeds of the stock feeder.
Describes how to switch between forward, reverse, and neutral feed directions.
Instructions for attaching a vacuum hose to the dust chute.
Positioning the feeder on a table saw for optimal use.
Positioning the feeder on a jointer for optimal use.
Guide for checking and replacing motor brushes.
Contact info for parts, service, warranty, and accessory information.
Contact and location details for service centers across the USA.
Contact and location details for service centers in Canada.
General
