To Next PageTo Next Page
Need help?Do you have a question about the Delta 58410 and is the answer not in the manual?
General| Brand | Delta |
|---|---|
| Model Number | 58410 |
| Product Type | Shower Head |
| Finish | Chrome |
| Flow Rate | 2.5 GPM |
| Installation Type | Wall Mounted |
| Material | Metal |
Identify your Delta shower column model and register it online for warranty and support.
Read and follow all safety warnings before installation to prevent injury or product failure.
Lists the necessary tools for installing the shower column and related components.
Proper methods for cleaning the shower column finish to maintain its durability and appearance.
Ensure installation area meets specified dimensions to prevent leakage or damage.
Verify the 1/2"-14 NPT drop ear fitting is securely fastened and square with the wall.
Detach the existing shower head and arm from the supply pipe.
Thread the inlet adapter into the drop ear fitting and hand tighten securely.
Orient the upper mounting flange, mark drilling points, and remove components.
Drill pilot holes, enlarge them, apply plumber's tape, and thread the inlet adapter.
Assemble toggle bolts to the upper flange and secure it to the wall.
Insert the lower mounting post, attach the column, and ensure it is level and marked.
Remove the shower column from the inlet adapter and prepare for lower mounting holes.
Assemble toggle bolts to the lower post and secure it to the wall.
For 588XX series, install the overhead shower arm and set screws.
Assemble upper/lower escutcheons onto posts and install the column onto the adapter and lower post.
Level the column and tighten set screws in the upper flange and lower post.
Apply silicone sealant to escutcheons before sliding them against the finished wall.
Ensure gasket is in place and hand-tighten the hose nut to the shower column.
Ensure gasket is in place and connect the conical hose nut to the hand shower.
Position the hand shower mount correctly, ensuring the silicone tab faces upwards.
Connect the shower head to the overhead shower arm, supporting the arm during tightening.
For 584XX series, rotate diverter lever and remove set screw for adjustment.
Separate column sections and rotate the hand shower mount for proper positioning.
Reinstall the hand shower mount, align column posts, and tighten set screws.
Check diverter lever travel in both directions and ensure proper operation.
Details what parts, finishes, and conditions are covered or excluded by the warranty.
Instructions for making a warranty claim and obtaining replacement parts from Delta.
Explains limitations on implied warranties and outlines consumer legal rights.
