To Next Page

To Previous Page

Step 3

Section 1: Crib Assembly

Parts and tools required to complete step.

M4 Allen Wrench

Supplied

From Step 1

F. Mattress Support x 1

K. M6 x15 mm Bolt x 4

Attach the Mattress Support (Part F) in all corners using (1) M6x15 mm Bolt (Part K) in each corner.

Tighten with the M4 Allen Wrench.

! WARNINGS ON POUCH MUST FACE UP.

WARNING:

The Warnings printed on the pouch attached to the

mattress support must face up, the springs must face up.

This crib has (3) adjustment positions, use the highest only

for new borns, move the mattress down as the child grows.

Fall Hazard: When child is able to pull to a standing position,

set mattress to lowest position and remove bumper pads,

large toys and other objects that could serve as steps

for climbing out.

ALL CORNERS

Delta 7888 User Manual

Questions and Answers: