AS Series Module Manual
9- 58
Click OK and verify the values (”POS,”+（R（D Register [26100], 3）） in the Packet View.
17) [，]: Use Address Constant to enter this Value and set the Format to ASCII.
Click OK and verify the values (”POS,”+（R（D Register [26100], 3）） in the Packet View.
18) [yyy] is a variable, so click Variable in the Message area to edit it. Use ISPSoft to get the value from data
registers D26102–D26103. The example below uses D26102: 16#3132 and D26103: 16#3300 and the value is
123.
To Next Page
Loading...