AS Series Module Manual
5- 42
Description Procedure
The signal received by channel 1 exceeds the
range of inputs that the hardware can receive.
Check the signal received by channel 1
The signal received by channel 2 exceeds the
range of inputs that the hardware can receive.
Check the signal received by channel 2.
The signal received by channel 3 exceeds the
range of inputs that the hardware can receive.
Check the signal received by channel 3.
The signal received by channel 4 exceeds the
range of inputs that the hardware can receive.
Check the signal received by channel 4.
When power-on, the module is not detected by
CPU module.
Check if the connection between module and CPU
module is working. If not, connect again.
To Next Page
Loading...