Delta C2000 Plus - Page 10

Chapter 1 Overview of Parallel Control Parallel Control Solution
4
C2000 Plus
Frame
G
H
VFD-_ _ _ C_ _ _-21 / -00
2200
2500
2800
3150
3550
4000
4500
5000
5600
*Output Rating
Heavy Duty
Rated Output Capacity (kVA)
367
383
438
491
544
613
690
741
872
Rated Output Current (A)
460
481
550
616
683
770
866
930
1094
Applicable Motor Output (kW)
220
250
280
315
355
400
450
500
560
Applicable Motor Output (HP)
300
340
375
420
475
530
600
675
750
Overload Capacity
150% of rated output current: 1 minute for every 5 minutes;
180% of rated output current: 3 seconds for every 30 seconds
Max. Output Frequency (Hz)
0.00–599.00
Carrier Frequency (kHz)
2–9 (Default: 4)
Super Heavy Duty
Rated Output Capacity (kVA)
295
315
366
438
491
544
544
690
741
Rated Output Current (A)
370
395
460
550
616
683
683
866
930
Applicable Motor Output (kW)
185
200
220
280
315
355
355
450
500
Applicable Motor Output(HP)
250
270
300
375
425
475
475
600
675
Overload Capacity
150% of rated output current: 1 minute for every 5 minutes;
200% of rated output current: 3 seconds for every 30 seconds
Max. Output Frequency (Hz)
0.00–599.00
Carrier Frequency (kHz)
2–9 (Default: 4)
2–9 (Default: 3)
Input Rating
Input Current
(A)
Heavy Duty
400
447
494
555
625
770
866
930
1094
Super Heavy Duty
380
390
400
494
555
590
625
866
930
Rated Voltage / Frequency
3-phase AC 380V–480V (-15 % – +10 %), 50 / 60 Hz
Operating Voltage Range
323–528 V
AC
Frequency Tolerance
47–63 Hz
Power Supply
Capacity
(kVA)
Heavy Duty
332.5
371.6
410.7
461.4
519.6
640.1
720.0
773.2
909.5
Super Heavy Duty
315.9
324.2
332.5
410.7
461.4
490.5
519.6
720.0
773.2
Efficiency (%)
98.2
Displacement Power Factor (cosθ)
>0.98
Drive Weight (kg)
134 ± 4
228
Cooling Method
Fan Cooling
Braking Chopper
Optional
DC choke
Built-in
EMC Filter
Optional
EMC-COP01
Frame G–H (VFDxxxC43A-00): Optional
Frame G–H (VFDxxxC43A-21): Built-in
Table 1-3
NOTE:
1. * : The default setting is heavy duty mode.
2. The carrier frequency is default. Increasing the carrier frequency requires a reduction in current. Refer to
Section 9-7 Derating Curve for details in C2000 Plus User Manual.
3. The AC motor drive should operate in derating current when its control method is set to FOC Sensorless,
TQC+PG, TQC sensorless, PM+PG or PM sensorless. Refer to description of Pr.06-55 in C2000 Plus User
Manual for more information.
4. The rated input current will be affected by not only power transformer and the connection of the reactors on
the input side, but also fluctuates with the impedance of power side.
5. Model VFD4500C43x-xx, VFD5000C43x-xx and VFD5600C43x-xx do not have UL certification.
6. Rated output capacity is calculated by 460 V
AC
, it is as a reference for the mains power drive capacity
selection.