Delta C2000 Plus - Page 11

Chapter 1 Overview of Parallel Control Parallel Control Solution
5
C2000-HS
Frame
G
H
VFD-_ _ _ C43x-HS
2200
3550
Output Rating
Normal Duty
Rated Output Capacity (kVA)
367
544
Rated Output Current (A)
460
683
Applicable Motor Output (kW)
220
355
Applicable Motor Output (HP)
300
475
Overload Capacity
120% of rated output current: 1 minute for every 5 minutes;
160% of rated output current: 3 seconds for every 30 seconds
Max. Output
Frequency (Hz)
IM
1000
900
PM
1000
900
Carrier Frequency (kHz)
2–9 (Default: 6)
Input
Rating
Input Current (A)
400
625
Rated Voltage / Frequency
3 phase 380–480 V
AC
(-15 – +10%), 50 / 60 Hz
Operating Voltage Range
323–528 V
AC
Frequency Tolerance
47–63 Hz
Efficiency (%)
> 98
> 98
Displacement Power Factor (cosθ)
> 0.98
Drive Weight (kg)
138
228
Cooling Method
Fan Cooling
Braking Chopper
Optional
DC choke
Built-in, EN61000-3-12
EMC Filter
Frame D0–H: Optional
Table 1-4
NOTE:
1. The carrier frequency is default. Increasing the carrier frequency requires a reduction in current. Refer to
Section 9-4 Derating Curve in C2000-HS User Manual.
2. Select the AC motor drive with capacity one grade larger for the impact load application.
3. The rated input current will be affected by not only Power Transformer and the connection of the reactors on
input side, but also fluctuates with the impedance of power side.
4. For Frame D0 and above, if the last character of the model is A then it is under IP20 protection level, but the
wiring terminal is under IP00 protection level.