Do you have a question about the Delta Cassidy 3597LF-MPU Series and is the answer not in the manual?
Brand | Delta |
---|---|
Model | Cassidy 3597LF-MPU Series |
Category | Plumbing Product |
Language | English |
Connect hot and cold end valves with gasket, secure with washers and brackets, and install handles.
Secure the spout with a washer and nut, using silicone under the gasket if the sink is uneven.
Push quick connects firmly upward onto receiving tubes and pull down moderately to ensure connection.
Remove stopper, flange, and tailpiece from the drain body, applying plumber tape as needed.
Apply silicone to flange, insert body into sink, screw flange, and secure pivot assembly.
Install horizontal rod and stopper, attach horizontal rod to strap, and connect to drain.
Attach hook-ups to hot and cold water supplies, choosing compatible connections like ball nose risers.
Turn on water supplies, flush lines for one minute to remove debris, then check all connections for leaks.
Troubleshoot leaks from the spout outlet by replacing seats/springs or stem unit assembly.
Install stems and 1/4 turn stops correctly for proper handle rotation.
Clean gently with a damp cloth and blot dry with a soft towel to preserve the finish.