Delta DVP32ES300T User Manual

Chapter 8 Hardware Configuration
8-19
8_
Select the Trigger User Message Enable check box and then click the to the right side of Trigger User
Message. Type some content for the email text in the dialog box.
If you select the Error Log Enable check box, the system automatically adds the error log to the email content.
Trigger Attachment Mode determines whether to add an attachment to the email. Check the maximum size allowed
for the email file before adding an attachment. Refer to the relevant email operation manuals for more information.
If you select None, no attachment is inserted.
 File
Allows you to select an error log or the system backup file from the memory card as the email attachment.
 PLC Device
The system automatically retrieves the device states or values listed in the table as the email attachment. After you
select this option, click
in the following dialog box to open the Attachment dialog box. You can set a maximum of
two groups of devices. For example, if the condition is met, the values in D0–D9 are sent as an attachment.
Select the receiver’s target email address for the triggered email in the Trigger Receiving table. Set the specific email
address in the Email section.

Delta DVP32ES300T Specifications

General

Brand	Delta
Model	DVP32ES300T
Category	Controller
Language	English