DVP-ES3 Series Operation Manual
Sockets
You can set the parameters for sockets through which data is transmitted. You must use this function with specific
applied instructions. Refer to the DVP-ES3 Series Programming Manual for more information, as sockets are not
described here. Refer to the related documents or manuals for more information about sockets. In the Socket table,
set COM port parameters for data transmission through Ethernet; however, you should use this function only with
specific API instructions. For relevant details, refer to DVP-ES3 Series Programming Manual.
The system for the DVP-ES3 Series module supports data transmission between the CPU module and other CPU
modules or devices through a socket as well as through TCP and UDP protocols. You can set up four connections in
each of the four groups. Select the Socket Function Enable checkbox and then select settings in the TCP and UDP
setting pages.
To Next Page
Loading...
Need help?
General
