13
See safety information before proceeding. Routine maintenance should be done at least once a year.
• Never use solvents, thinner or harsh chemicals when cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse metal parts in water.
• Do not immerse resin parts in water over 140º Fahrenheit.
Turn off power source. Review all safety precautions.
CARE AND MAINTENANCE
1. To remove grille , squeeze springs and pull down.
2. Clean the grille in a sink and dry with a cloth.
3. Remove dust and dirt from the fan body with a vacuum
cleaner.
4. Dampen cloth with dust detergent and wipe the fan body
. Then wipe dry with a clean cloth.
5. Replace grille back onto fan body .
4
6. Turn on power source to operate fan again.
1
4
1
Vacuum
cleaner
4
4
1
2
3
4
5
4
4
1
1
14
To Next Page
Loading...
Need help?
General
