Delta TP Series - Password Function; Communication Connection

- 5 -
Figure8
 Password Function
1. The password can be alphabets from A to Z or numbers from 0 to 9. To input English
alphabets, please use numeric keys 0 ~ 4. Press numeric keys 0~4 repeatedly and
the characters will change as the following orders.
0: characters change in a loop as follows: 0→A→B→C→D→E→F→0
1: characters change in a loop as follows: 1→G→H→I→J→K→1
2: characters change in a loop as follows: 2→L→M→N→O→P→2
3: characters change in a loop as follows: 3→Q→R→S→T→U→V→3
4: characters change in a loop as follows: 4→W→X→Y→Z→4
2. If users forgot the password, the password can be cleared by using the following
code: 8888. This universal code will clear the password and internal programs.
TP04G-BL-C will also be reset to factory settings by using this code. Please pay
close attention when using it.
 Communication Connection
y TP04G-BL-C may connect to a PC by using connection cable DVPACAB530
PC or TP04G-BL-C
9 PIN D-SUB
TO PC (RS-232)
TO TP04G-BL-C
9 PIN D-SUB
1
5
6
9
5
1
9
6
Figure9
9 PIN D-SUB female
Rx 2
55
PC COM Port
9 PIN D-SUB female
3 Tx
2 Rx
TP04G-BL-C COM Port
Tx 3
Figure10
GND GND
y TP04G-BL-C may connect to a DVP-PLC by using connection cable DVPACAB215 /
DVPACAB230 / DVPACAB2A30 / DVPACAB2B10
1. DVPACAB215 / DVPACAB230
TO PC or TP04G-BL-C
1
13
14
1
5
6
9
25 PIN D-SUB
9 PIN D-SUB
TO PLC
MINI DIN TERMINAL
Figure11