Chapter 10 Digital KeypadC2000-HS
10-11
Press ENTER key to go to “Save in the moto
drive” screen.
Use Up / Down key to select a symbol.
Use Left / Right key to move the cursor to
select a file name.
String & Symbol Table:
！＂＃＄％＆＇（）＊＋，－．／０１２３４５６７８９：；＜＝＞？＠
ＡＢＣＤＥＦＧＨＩＪＫＬＭＮＯＰＱＲＳＴＵＶＷＸＹＺ［＼］＾＿｀
ａｂｃｄｆｇｈｉｊｋｌｍｎｏｐｑｒｓｔｕｖｗｘｙｚ｛｜｝～
Once the file name is confirmed, press
ENTER key.
To begin copying parameters until it is done.
When copying parameters is completed,
keypad will automatically be back to this
screen.
Press Right key to see the date of copying
parameters.
Press Right key to see the time of copying
parameters.
6. Fault Record
Press
to select.
Able to store 6 error codes (Keypad V1.02 and previous versions)
Able to store 30 error codes (Keypad V1.20 and later version)
The most recent error record is shown as the first record. Select an error
record to see its details such as date, time, frequency, current, voltage,
DCBUS voltage)
Press Up / Down key to select an error record.
fter selecting an error code, press ENTER to see
that error record’s detail
Press Up / Down key to see an error record’s detail
such as date, time, frequency, current, voltage,
DCBUS voltage.
Press Up / Down key to select an error record.
fter selecting an error code, press ENTER to see
that error record’s detail
To Next Page
Loading...