Chapter 12 Description of Parameter SettingsC2000-HS
12.1-11-13
Point-to-Point Position Control Deceleration Time
Default: 3.00
Settings 0.00–655.35 sec.
Torque Output Filter Gain
Default: 0.050
Settings 0.000–65.535 sec.
Sets the filter gain of the torque output display (keypad display and communication read),
including Pr.00-04 = 8 displays the output torque (%) that the drive calculates, the output torque
(XXX.X %) of communication address 210B and the positive / negative output torque (%) that
2208 drive calculates (XXX.X %).
To Next Page
Loading...