Delta VFD110C43A User Manual

Chapter 1 IntroductionC2000 Series
1-1
Chapter 1 Introduction
1-1 Receiving and Inspection
After receiving the AC motor drive, please check for the following:
1. Please inspect the unit after unpacking to assure it was not damaged during shipment. Make sure that
the part number printed on the package corresponds with the part number indicated on the
nameplate.
2. Make sure that the voltage for the wiring lie within the range as indicated on the nameplate. Please
install the AC motor drive according to this manual.
3. Before applying the power, please make sure that all the devices, including power, motor, control
board and digital keypad, are connected correctly.
4. When wiring the AC motor drive, please make sure that the wiring of input terminals “R/L1, S/L2, T/L3”
and output terminals”U/T1, V/T2, W/T3” are correct to prevent drive damage.
5. When power is applied, select the language and set parameter groups via the digital keypad
(KPC-CC01). When executes trial run, please begin with a low speed and then gradually increases
the speed untill the desired speed is reached.
1-2 Nameplate Information
MODEL:VFD007C43A
INPUT:
Normal Duty: 3PH 380-480V 50/60Hz 4.3A
Heavy Duty: 3PH 380-480V 50/60Hz 4.1A
OUTPUT:
Ver si on :
FREQU ENCY RA NGE:
Normal Duty: 3PH 0-480V 3A 2.4KVA 1HP
Heavy Duty: 3PH 0-480V 2.9A 2.3KVA 1HP
Normal Duty: 0 -59 9Hz
Heavy Duty: 0-300Hz
VX.XX
007C43A7T14300002
DE LTA EL ECTRONICS. INC .
MA DE IN XXXXXX X
AC Drive Model
Input Voltage/Current
Output Voltage/Current
Frequency Range
Firmware Version
Certif cations
Serial Number
Enclosure type (IPXX)
i

Delta VFD110C43A Specifications

General

Brand	Delta
Model	VFD110C43A
Category	Media Converter
Language	English

Summary

1-1 Receiving and Inspection

1-2 Nameplate Information

1-3 Model Name

Version type

Explanation of different version types for the AC motor drive model.

Input voltage

Details on the input voltage specifications for different AC drive models.

Applicable motor capacity

Information on the motor capacity ratings associated with AC drive models.

1-4 Serial Number

Production number

Identifier for the specific production batch or sequence of the serial number.

Production week

Indicates the week of production within the serial number.

Production year

Indicates the year of production within the serial number.

Production factory

Identifies the manufacturing plant where the AC drive was produced.

1-5 RFI Jumper

Frame A~C RFI Jumper Handling

Instructions for RFI jumper handling specific to AC drive Frames A, B, and C.

Frame D0~H RFI Jumper Handling

Instructions for RFI jumper handling specific to AC drive Frames D0 through H.

Grounding and RFI Jumper Considerations

Important points regarding ground connection and RFI jumper use in various systems.

1-6 Dimensions

Frame A Dimensions

Physical dimensions and mounting hole specifications for Frame A AC motor drives.

Frame B Dimensions

Physical dimensions and mounting hole specifications for Frame B AC motor drives.

Frame C Dimensions

Physical dimensions and mounting hole specifications for Frame C AC motor drives.

Frame D0 Dimensions

Physical dimensions and mounting hole specifications for Frame D0 AC motor drives.

Frame D Dimensions

Physical dimensions and mounting hole specifications for Frame D AC motor drives.

Frame E Dimensions

Physical dimensions and mounting hole specifications for Frame E AC motor drives.

Frame F Dimensions

Physical dimensions and mounting hole specifications for Frame F AC motor drives.

Frame G Dimensions

Physical dimensions and mounting hole specifications for Frame G AC motor drives.

Frame H Dimensions

Physical dimensions and mounting hole specifications for Frame H AC motor drives.