Delta VFD300C43A User Manual

Chapter 1 IntroductionC2000 Series
1-1
Chapter 1 Introduction
1-1 Receiving and Inspection
After receiving the AC motor drive, please check for the following:
1. Please inspect the unit after unpacking to assure it was not damaged during shipment. Make sure that
the part number printed on the package corresponds with the part number indicated on the
nameplate.
2. Make sure that the voltage for the wiring lie within the range as indicated on the nameplate. Please
install the AC motor drive according to this manual.
3. Before applying the power, please make sure that all the devices, including power, motor, control
board and digital keypad, are connected correctly.
4. When wiring the AC motor drive, please make sure that the wiring of input terminals “R/L1, S/L2, T/L3”
and output terminals”U/T1, V/T2, W/T3” are correct to prevent drive damage.
5. When power is applied, select the language and set parameter groups via the digital keypad
(KPC-CC01). When executes trial run, please begin with a low speed and then gradually increases
the speed untill the desired speed is reached.
1-2 Nameplate Information
MODEL:VFD007C43A
INPUT:
Normal Duty: 3PH 380-480V 50/60Hz 4.3A
Heavy Duty: 3PH 380-480V 50/60Hz 4.1A
OUTPUT:
Ver si on :
FREQU ENCY RA NGE:
Normal Duty: 3PH 0-480V 3A 2.4KVA 1HP
Heavy Duty: 3PH 0-480V 2.9A 2.3KVA 1HP
Normal Duty: 0 -59 9Hz
Heavy Duty: 0-300Hz
VX.XX
007C43A7T14300002
DE LTA EL ECTRONICS. INC .
MA DE IN XXXXXX X
AC Drive Model
Input Voltage/Current
Output Voltage/Current
Frequency Range
Firmware Version
Certif cations
Serial Number
Enclosure type (IPXX)
i

Delta VFD300C43A Specifications

General

Brand	Delta
Model	VFD300C43A
Category	Media Converter
Language	English

Summary

Receiving and Inspection

Nameplate Information

Nameplate Details

Details on AC drive model, input/output specs, frequency range, firmware, certifications, enclosure, and serial number.

Model Name

Model Name Decoding

Breakdown of the AC drive model name into version, voltage, series, and capacity components.

Serial Number

Serial Number Decoding

Explanation of the components within the AC drive's serial number, including production details.

RFI Jumper

RFI Jumper for Frame A-C

Instructions and screw torque for installing/removing the RFI jumper on AC drives Frame A through C.

RFI Jumper for Frame D0-H

Procedures for RFI jumper installation/removal on AC drives Frame D0 through H, including MOV-PLATE.

Ground Connection and RFI

Important safety and operational points regarding ground connection and RFI suppression.

RFI Jumper for Floating Ground Systems

Guidance on RFI jumper removal and EMC considerations for floating ground (IT) systems.

RFI Jumper for Asymmetric Ground Systems

Cautionary advice and conditions for RFI jumper removal in asymmetric (TN) ground systems.

Internal RFI Capacitor Function

Explanation of how internal RFI capacitors reduce electromagnetic radiation and EMC filter usage.

Dimensions

Frame A Dimensions

Detailed dimensions and mounting hole specifications for Frame A AC drives.

Frame B Dimensions

Detailed dimensions and mounting hole specifications for Frame B AC drives.

Frame C Dimensions

Detailed dimensions and mounting hole specifications for Frame C AC drives.

Frame D0-1 Dimensions

Detailed dimensions and mounting hole specifications for Frame D0-1 AC drives.

Frame D0-2 Dimensions

Detailed dimensions and mounting hole specifications for Frame D0-2 AC drives.

Frame D1 Dimensions

Detailed dimensions and mounting hole specifications for Frame D1 AC drives.

Frame D2 Dimensions

Detailed dimensions and mounting hole specifications for Frame D2 AC drives.

Frame E1 Dimensions

Detailed dimensions and mounting hole specifications for Frame E1 AC drives.

Frame E2 Dimensions

Detailed dimensions and mounting hole specifications for Frame E2 AC drives.

Frame F1 Dimensions

Detailed dimensions and mounting hole specifications for Frame F1 AC drives.

Frame F2 Dimensions

Detailed dimensions and mounting hole specifications for Frame F2 AC drives.

Frame G1 Dimensions

Detailed dimensions and mounting hole specifications for Frame G1 AC drives.

Frame G2 Dimensions

Detailed dimensions and mounting hole specifications for Frame G2 AC drives.

Frame H1 Dimensions

Detailed dimensions and mounting hole specifications for Frame H1 AC drives.

Frame H2 Dimensions

Detailed dimensions and mounting hole specifications for Frame H2 AC drives.

Frame H3 Dimensions

Detailed dimensions and mounting hole specifications for Frame H3 AC drives.