EasyManua.ls Logo

Delta VFD150C43A - User Manual

Delta VFD150C43A
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Chapter 1 IntroductionC2000 Series
1-1
Chapter 1 Introduction
1-1 Receiving and Inspection
After receiving the AC motor drive, please check for the following:
1. Please inspect the unit after unpacking to assure it was not damaged during shipment. Make sure that
the part number printed on the package corresponds with the part number indicated on the
nameplate.
2. Make sure that the voltage for the wiring lie within the range as indicated on the nameplate. Please
install the AC motor drive according to this manual.
3. Before applying the power, please make sure that all the devices, including power, motor, control
board and digital keypad, are connected correctly.
4. When wiring the AC motor drive, please make sure that the wiring of input terminals “R/L1, S/L2, T/L3”
and output terminals”U/T1, V/T2, W/T3” are correct to prevent drive damage.
5. When power is applied, select the language and set parameter groups via the digital keypad
(KPC-CC01). When executes trial run, please begin with a low speed and then gradually increases
the speed untill the desired speed is reached.
1-2 Nameplate Information
MODEL:VFD007C43A
INPUT:
Normal Duty: 3PH 380-480V 50/60Hz 4.3A
Heavy Duty: 3PH 380-480V 50/60Hz 4.1A
OUTPUT:
Ver si on :
FREQU ENCY RA NGE:
Normal Duty: 3PH 0-480V 3A 2.4KVA 1HP
Heavy Duty: 3PH 0-480V 2.9A 2.3KVA 1HP
Normal Duty: 0 -59 9Hz
Heavy Duty: 0-300Hz
VX.XX
007C43A7T14300002
DE LTA EL ECTRONICS. INC .
MA DE IN XXXXXX X
AC Drive Model
Input Voltage/Current
Output Voltage/Current
Frequency Range
Firmware Version
Certif cations
Serial Number
Enclosure type (IPXX)
i
Question and Answer IconNeed help?

Do you have a question about the Delta VFD150C43A and is the answer not in the manual?

Delta VFD150C43A Specifications

General IconGeneral
BrandDelta
ModelVFD150C43A
CategoryMedia Converter
LanguageEnglish

Summary

1-1 Receiving and Inspection

1-2 Nameplate Information

1-3 Model Name

1-4 Serial Number

1-5 RFI Jumper

1-6 Dimensions

Frame B Dimensions

Frame C Dimensions

Frame D0 Dimensions

D0-1: VFD370 C43 S; VFD450 C43 S;

Dimensions and specifications for Frame D0, model variant D0-1, covering specific AC Drive models.

Frame D0 Dimensions

D0-2: VFD370 C43 U; VFD450 C43 U;

Dimensions and specifications for Frame D0, model variant D0-2, covering specific AC Drive models.

Frame D Dimensions

D1: VFD300 C23 A; VFD370 C23 A; VFD550 C43 A; VFD750 C43 A

Dimensions and specifications for Frame D, model variant D1, covering specific AC Drive models.

Frame D Dimensions

D2: VFD300 C23 E; VFD370 C23 E; VFD550 C43 E; VFD750 C43 E

Dimensions and specifications for Frame D, model variant D2, covering specific AC Drive models.

Frame E Dimensions

E1: VFD450 C23 A; VFD550 C23 A; VFD750 C23 A; VFD900 C43 A; VFD1100 C43 A

Dimensions and specifications for Frame E, model variant E1, covering specific AC Drive models.

Frame E Dimensions

E2: VFD450 C23 E; VFD550 C23 E; VFD750 C23 E; VFD900 C43 E; VFD1100 C43 E

Dimensions and specifications for Frame E, model variant E2, covering specific AC Drive models.

Frame F Dimensions

F1: VFD900 C23 A; VFD1320 C43 A; VFD1600 C43 A

Dimensions and specifications for Frame F, model variant F1, covering specific AC Drive models.

Frame F Dimensions

F2: VFD900 C23 E; VFD1320 C43 E; VFD1600 C43 E

Dimensions and specifications for Frame F, model variant F2, covering specific AC Drive models.

Frame G Dimensions

G1: VFD1850 C43 A; VFD2200 C43 A

Dimensions and specifications for Frame G, model variant G1, covering specific AC Drive models.

Frame G Dimensions

G2: VFD1850 C43 E; VFD2200 C43 E

Dimensions and specifications for Frame G, model variant G2, covering specific AC Drive models.

Frame H Dimensions

H1: VFD2800 C43 A; VFD3150 C43 A; VFD3550 C43 A; VFD4500 C43 A

Dimensions and specifications for Frame H, model variant H1, covering specific AC Drive models.

Frame H Dimensions

H2: VFD2800 C43 E-1; VFD3150 C43 E-1; VFD3550 C43 E-1; VFD4500 C43 E-1

Dimensions and specifications for Frame H, model variant H2, covering specific AC Drive models.

Frame H Dimensions

H3: VFD2800 C43 E; VFD3150 C43 E; VFD3550 C43 E

Dimensions and specifications for Frame H, model variant H3, covering specific AC Drive models.

Related product manuals