To Next Page

To Previous Page

Chapter 12 Descriptions of Parameter SettingsMS300

265

 Entering the correct password in Pr.00-07 only temporarily deactivates the password. To

permanently deactivate password protection, set Pr.00-08 to 0 manually. Otherwise, password

protection is always reactivated after you reboot the motor drive.

 The keypad copy function works only when the password protection is deactivated (temporarily

or permanently), and the password set in Pr.00-08 cannot be copied to the keypad. So when

copying parameters from the keypad to the motor drive, set the password manually again in the

motor drive to activate password protection.

00-10

Control Mode

Default: 0

Settings

0: Speed Control mode

2: Torque mode

 Determines the control mode of the AC motor drive.

 When Pr.00-10 = 2: Torque mode, control mode is IM TQC Sensorless.

00-11

Speed Control Mode

Default: 0

Settings

0: IMVF (IM V/F control)

1: IMVFPG (IM V/F control + MI7 one-phase pulse input)

2: IM/PM SVC (IM / PM Space Vector Control)

5: IMFOC Sensorless (IM Field-Oriented sensorless vector Control)

 Determines the control mode of the AC motor drive:

0: IM V/F control: you can set the proportion of V/F as required and control multiple motors

Delta VFD2A8MS21ANSAA User Manual

Other manuals for Delta VFD2A8MS21ANSAA