Delta VFD2A8MS21ANSAA User Manual

Chapter 12 Descriptions of Parameter SettingsMS300
310
Settings
Functions
Descriptions
19
External interrupt B.B.
input (Base Block)
Activates when external interrupt (B.B.) stop output occurs in the
drive.
20
Warning output
Activates when a warning is detected.
21
Over-voltage
Activates when over-voltage is detected.
22
Over-current stall
prevention
Activates when the over-current stall prevention is detected.
23
Over-voltage stall
prevention
Activates when over-voltage stall prevention is detected.
24
Operation mode
Activates when the source of operation command is not
controlled by the digital keypad (Pr.00-21 ≠ 0).
25
Forward command
Activates when the operation direction is forward.
26
Reverse command
Activates when the operation direction is reverse.
29
Output when frequency
≥ Pr.02-34
Activates when frequency is ≥ Pr.02-34
(actual output H ≥ Pr.02-34).
30
Output when frequency
< Pr.02-34
Activates when frequency is < Pr.02-34
(actual output H < Pr.02-34).
31
Y-connection for the
motor coil
Activates when Pr.05-24 = 1, the frequency output is lower than
Pr.05-23 minus 2 Hz and the time is longer than Pr.05-25.
32
∆-connection for the
motor coil
Activates when Pr.05-24 = 1, the frequency output is higher than
Pr.05-23 plus 2 Hz and the time is longer than Pr.05-25.
33
Zero speed
(actual output frequency)
Activates when the actual output frequency is 0
(the drive is in RUN mode).
34
Zero speed including
stop
(actual output frequency)
Activates when the actual output frequency is 0 or stopped.
35
Error output selection 1
(Pr.06-23)
Activates when Pr.06-23 is ON.
36
Error output selection 2
(Pr.06-24)
Activates when Pr.06-24 is ON.
37
Error output selection 3
(Pr.06-25)
Activates when Pr.06-25 is ON.
38
Error output selection 4
(Pr.06-26)
Activates when Pr.06-26 is ON.
40
Speed reached
(including Stop)
Activates when the drive’s output frequency reaches the setting
frequency or stopped.
42
Crane function
Use this function with Pr.02-34 and Pr.02-58.
Refer to Pr.02-34 and 02-58 for details and application examples.
43
Actual motor speed
detection
Activates when the motor actual speed is less than Pr.02-47.
44
Low current output
Use this function with Pr.06-71–Pr.06-73.

Delta VFD2A8MS21ANSAA Specifications

General

Brand	Delta
Model	VFD2A8MS21ANSAA
Category	DC Drives
Language	English