Delta VFD300C43S-HS User Manual

Chapter 10 Digital KeypadC2000-HS
10-15
To begin copying parameters until it is done.
When copying parameters is completed, keypad will
automatically be back to this screen.
Press Right key to see the date of copying
parameters.
Press Right key to see the time of copying
parameters.
12. Display setup
Press
to setting menu.
1. Contrast
Use Up / Down key to adjust the setting value.
After selecting a setting value. Press ENTER to
see screen’s display after contrast is adjusted to
be +10.
When the setting value is 0 Min, the backlight
will be steady on.
Then press ENTER.
After select a setting value Press ENTER to see
screen’s display result after contrast is adjusted
to be -10.
2. Back-light
Press ENTER to go to “Back Light Time Setting”
screen.
Use Up / Down key to adjust the setting value.
When the setting value is 0 Min, the backlight will
be steady on.

Delta VFD300C43S-HS Specifications

General

Brand	Delta
Model	VFD300C43S-HS
Category	DC Drives
Language	English