A
Adrian TaylorAug 10, 2025
How to troubleshoot OFF POWER LED on Delta DC Drives?
- JJames JohnsonAug 10, 2025
If the POWER LED is off, it indicates no power. Check if the connection between the CMM-PD02 and the AC motor drive is normal.
To Next PageTo Next PageHow to troubleshoot OFF POWER LED on Delta DC Drives?
If the POWER LED is off, it indicates no power. Check if the connection between the CMM-PD02 and the AC motor drive is normal.
What to do if the Delta DC Drives NET LED flashes orange?
If the NET LED flashes orange, it means that the CMM-PD02 fails to communicate with the AC motor drive. To solve this, switch off the power and check whether the CMM- PD02 is correctly installed and normally connected to the AC motor drive.
Why is the NET LED on my Delta DC Drives red?
A red light on the NET LED indicates that the CMM-PD02 is not connected to the PROFIBUS DP bus. To resolve this, connect the CMM-PD02 to the PROFIBUS DP bus.
What to do if the Delta DC Drives NET LED flashes red?
If the NET LED flashes red, it signifies an invalid PROFIBUS communication address. To fix this, set the PROFIBUS address of the CMM-PD02 between 1–125 (decimal).
General| Output Current | 32 A |
|---|---|
| Protection Class | IP20 |
| Horsepower | 15 HP |
| Series | VFD |
| Control Method | V/f Control |
Specifies minimum clearances for installation.
Details airflow requirements and power dissipation.
Illustrates the overall system wiring with component descriptions.
Provides specific wiring instructions and diagrams.
Shows the terminal layout and descriptions.
Covers wiring precautions and specifications for control terminals.
Details the digital keypad, its functions, and troubleshooting.
Explains how to install option cards.
Provides profile, features, and specifications for the Profibus DP card.
Details profile, features, and specifications for the DeviceNet card.
Describes the single-port EtherNet/IP, Modbus TCP communication card.
Details the dual-port EtherNet/IP, Modbus TCP communication card.
Covers CANopen communication card profile, RJ45 pin definition, specifications, and communication cable.
Details EtherCAT communication card profile, RJ45 pin definition, specifications, and network connection.
Explains derating curves.
Describes the keyboard panel and its functions.
Explains how to operate the keypad.
Details digital input/output parameters.
Explains analog input/output parameters.
Details motor parameters.
Lists protection parameters.
Details high-function PID parameters.
Covers communication parameters.
Provides detailed descriptions of parameters.
Lists fault codes for the digital keypad.
Summarizes all fault codes.
Details low voltage level settings and related issues.
Explains over-voltage stall prevention.
Details the selection of over-voltage stall prevention.
Explains over-current stall prevention during acceleration.
Details over-current stall prevention during operation.
Explains over-torque detection for Motor 1.
Details over-torque detection level for Motor 1.
Explains over-torque detection time for Motor 1.
Explains over-torque detection for Motor 2.
Details over-torque detection level for Motor 2.
Explains over-torque detection time for Motor 2.
Explains electronic thermal relay selection for Motor 1.
Details action time for electronic thermal relay 1.
Covers overheat warning settings.
Explains stall prevention level.
Explains electronic thermal relay selection for Motor 2.
Details action time for electronic thermal relay 2.
Details STO latch selection.
Explains output phase loss detection action.
