Delta VFD300C43S-HS User Manual

Chapter 13 Warning CodesC2000-HS
13-40
ID No. Display on LCM Keypad Warning Name Description
93
Copy PLC: version
error (CPLv)
Copy PLC version error.
When non-C2000-HS built-in PLC is copied to
C2000-HS drive, the CPLv warning shows
Action and Reset
Action level Software detection
Action time Immediately acts
Warning setting parameter N/A
Reset method Manual reset
Reset condition Directly resets
Record N/A
Cause Corrective Actions
Non-C2000-HS PLC program is
copied to C2000-HS
Check if the copied PLC program is for C2000-HS.
Use the correct C2000-HS PLC program.
ID No. Display on LCM Keypad Warning Name Description
94
Copy PLC: size error
(CPLS)
Copy PLC Capacity size error
Action and Reset
Action level Software detection
Action time Immediately acts
Warning setting parameter N/A
Reset method Manual reset
Reset condition Directly resets
Record N/A
Cause Corrective Actions
The PLC copied to C2000-HS
exceeds the allowable capacity
Check if the copied PLC program is for C2000-HS
Use C2000-HS PLC program with correct capacity
ID No. Display on LCM Keypad Warning Name Description
95
Copy PLC: PLC
function (CPLF)
KPC-CC01 Copy PLC function should be executed
when PLC is off
Action and Reset
Action level Software detection
Action time Immediately acts
Warning setting parameter N/A
Reset method Manual reset
Reset condition Directly resets
Record N/A
Cause Corrective Actions
PLC function is enabled when
KPC-CC01 is running copy PLC
Disable PLC function first, then run the PLC copy function again

Delta VFD300C43S-HS Specifications

General

Brand	Delta
Model	VFD300C43S-HS
Category	DC Drives
Language	English