Delta VFD300C43S-HS User Manual

Chapter 14 Fault Codes and DescriptionsC2000-HS
14-51
ID* Display on LCM Keypad Fault Name Fault Descriptions
106
CANopen station
address error (CAdE)
CANopen station address error (only supports 1 – 127)
Action and Reset
Action level Software detection
Action time Immediately act
Fault treatment parameter N/A
Reset method Manual reset (Pr. 00-02=7)
Reset condition N/A
Record Yes
Cause Corrective Actions
Incorrect setting of CANopen
station address
1. Disable CANopen (Pr. 09-36=0)
2. Reset CANopen (Pr. 00-02=7)
3. Reset CANopen station address (Pr. 09-36)
ID* Display on LCM Keypad Fault Name Fault Descriptions
107
CANopen memory
error (CFrE)
CANopen memory error
Action and Reset
Action level
When the user update firmware version of the control board, the FRAM internal
data will not be changed, and then CFrE fault will occur.
Action time Immediately act
Fault treatment parameter N/A
Reset method Manual reset
Reset condition Pr. 00-02=7
Record Pr. 00-21=3, the fault is recorded
Cause Corrective Actions
CANopen internal memory error
1. Disable CANopen (Pr. 09-36=0)
2. Reset CANopen (Pr. 00-02=7)
3. Reset CANopen station address (Pr. 09-36)

Delta VFD300C43S-HS Specifications

General

Brand	Delta
Model	VFD300C43S-HS
Category	DC Drives
Language	English