EasyManuals Logo

Delta VFD370C43S-HS User Manual

Delta VFD370C43S-HS
814 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #279 background imageLoading...
Page #279 background image
Chapter 12 Description of Parameter SettingsC2000-HS
12.1-00-13
Operation Command Source (AUTO)
Default: 0
Settings 0: Digital keypad
1: External terminals
2: RS-485 serial communication
3: CANopen card
5: Communication card (does not include CANopen card)
Determines the operation frequency source in AUTO mode.
When you control the operation command by the keypad KPC-CC01, keys RUN, STOP and JOG
(F1) are valid.
Stop Method
Default: 0
Settings 0: Ramp to stop
1: Coast to stop
Determines how the motor is stopped when the drive receives the Stop command.
Ramp to stop: the AC motor drive decelerates to 0 or the minimum output frequency (Pr. 01-09)
according to the set deceleration time, and then to stop (according to Pr. 01-07).
Coast to stop: the AC motor drive stops output immediately, and the motor coasts to stop
according to the load inertia.
(1) Use “ramp to stop” for the safety of personnel, or to prevent material from being wasted in
applications where the motor must stop immediately after the drive stops. You must set the
deceleration time accordingly.
(2) If idling is allowed, or the load inertia is large, use “coast to stop”. For example, blowers,
punching machines and pumps.
Control of Motor Direction
Default: 0
Settings 0: Enable forward / reverse
1: Disable reverse
2: Disable forward
Enables the AC motor drives to run in the forward and reverse direction. You can use it to prevent
a motor from running in a direction that would cause injury or damage to the equipment.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Delta VFD370C43S-HS and is the answer not in the manual?

Delta VFD370C43S-HS Specifications

General IconGeneral
BrandDelta
ModelVFD370C43S-HS
CategoryDC Drives
LanguageEnglish

Related product manuals