Delta VFD370C43S-HS User Manual

Chapter 12 Description of Parameter SettingsC2000-HS
12.1-06-5

Over-torque Detection Selection (OT1)
Default: 0
Settings 0: No function
1: Continue operation after over-torque detection during constant speed
operation
2: Stop after over-torque detection during constant speed operation
3: Continue operation after over-torque detection during RUN
4: Stop after over-torque detection during RUN

Over-torque Detection Selection (OT2)
Default: 0
Settings 0: No function
1: Continue operation after over-torque detection during constant speed
operation
2: Stop after over-torque detection during constant speed operation
3: Continue operation after over-torque detection during RUN
4: Stop after over-torque detection during RUN
 When you set Pr. 06-06 and Pr. 06-09 to 1 or 3, a warning message displays, but there is no error
record.
 When you set Pr. 06-06 and Pr. 06-09 to 2 or 4, a warning message displays and there is an error
record.

Over-torque Detection Level (OT1)
Default: 120
Settings 10–250% (100% corresponds to the rated current of the drive)

Over-torque Detection Level (OT1)
Default: 0.1
Settings 0.0–60.0 sec.

Over-torque Detection Level (OT2)
Default: 120
Settings 10–250% (100% corresponds to the rated current of the drive)

Over-torque Detection Time (OT2)
Default: 0.1
Settings 0.0–60.0 sec.
 When the output current exceeds the over-torque detection level (Pr. 06-07 or Pr. 06-10) and
exceeds the over-torque detection time (Pr. 06-08 or Pr. 06-11), the over-torque detection follows
the setting of Pr. 06-06 and Pr. 06-09.
 When you set Pr. 06-06 or Pr. 06-09 to 1 or 3, an ot1 / ot2 warning displays while the drive keeps
running. The warning remains on until the output current is smaller than 5% of the over-torque
detection level.

Delta VFD370C43S-HS Specifications

General

Brand	Delta
Model	VFD370C43S-HS
Category	DC Drives
Language	English