Chapter 12 Description of Parameter SettingsC2000-HS
12.2-00-8
bit1=0: no function.
bit1=1: Inertia estimation function is enabled. bit1 setting would not activate the estimation
process, set Pr.05-00 = 12 to begin FOC / TQC Sensorless inertia estimating.
Per Unit of System Inertia
Default: 256
Settings 1–65535 (256=1PU)
To get the system inertia from Pr.11-01, user needs to set Pr.11-00 to bit1=1 and execute
continuous forward / reverse running.
To Next Page
Loading...
Need help?
General