Table of Contents
Copyright Notice
Limitation of Liability
Chapter1. Use and Installation
1-1 Receiving and Inspection 1-2
1-2 Product Specifications 1-4
1-3 Overview of Hybrid Servo Systems 1-6
1-4 Product Installation 1-9
1-5 Product Dimensions 1-15
Chapter 2. Wiring
2-1 Description of Wiring 2-4
2-2 Description of Terminals on Main Circuit 2-12
2-3 Description of Terminals on Control Circuit 2-21
Chapter 3. Machine Adjustment Procedure
3-1 Description of Control Panel 3-2
3-2 System Setup and Machine Adjustment Flowcharts 3-7
3-3 Machine Adjustment Procedure 3-9
3-4 Confluence Machine Tuning Proce 3-19
3-5 Confluence / Diversion Mode Adjustment Procedure 3-22
Chapter 4. Description of Parameters
4-1 Summary of Parameters 4-2
4-2 Detailed Description of Parameters 4-21
Chapter 5. Method of Anomaly Diagnosis
5-1 Unusual Signal 5-2
5-2 Dynamic fault processing and troubleshooting 5-14
5-3 Resolution for electromagnetic noise and induction noise 5-24
5-4 Environment and Facilities for Installation 5-25
To Next Page
Loading...
