Delta VFD550VL43C-J User Manual

Chapter 4 Description of Parameters | VFD-VJ
4-13
Pr. Name of Parameter Setting
Factory
Setting
VF
FOCPG
FOCPM
31: Memory read error (cF2) ○ ○ ○
32: Isum current detection error (cd0) ○ ○ ○
33: U-phase current detection error (cd1) ○ ○ ○
34: V-phase current detection error (cd2) ○ ○ ○
35: W-phase current detection error (cd3) ○ ○ ○
36: Over- current detection error (Hd0) ○ ○ ○
37: Over-current detection error (Hd1) ○ ○ ○
38: Over-voltage detection error (Hd2) ○ ○ ○
39: Ground current detection error (Hd3) ○ ○ ○
40: Auto tuning error (AuE) ○ ○
41: Reserved ○ ○ ○
42: PG feedback error (PGF1) ○ ○
43: PG feedback loss (PGF2) ○ ○
44: PG feedback stall (PGF3) ○ ○
45: PG slip error (PGF4) ○ ○
46: Reserved ○ ○ ○
47: Reserved ○ ○ ○
48: Reserved
49: External fault input (EF) ○ ○ ○
50: Emergency stop (EF1) ○ ○ ○
51: Reserved
52: Password error(Pcod) ○ ○ ○
53: CPU error (ccod) (VJ-C) ○ ○ ○
54: Communication error (wrong
command)(cE1)
○ ○ ○
55: Communication error (wrong data
address) (cE2)
○ ○ ○
56: Communication error (wrong data value)
(cE3)
○ ○ ○
57: Communication error (wrong data written
address) (cE4)
○ ○ ○
58: RS-485 Communication time out (cE10) ○ ○ ○
59: Reserved ○ ○ ○
60: Braking transistor error (bF) ○ ○ ○
61~63: Reserved ○ ○ ○
64: Reserved ○ ○ ○
65: PG card information error or magnetic
pole angle tuning error (PGF5)
○

Delta VFD550VL43C-J Specifications

General

Brand	Delta
Model	VFD550VL43C-J
Category	Servo Drives
Language	English