How to use DeltaTRAK Thermometer after it was in high/low temperature condition?
If your DeltaTRAK Thermometer has been exposed to high or low temperature conditions and you've brought it to room temperature, wait 10 minutes before taking the body temperature to ensure an accurate reading.
Why does my DeltaTRAK DT-8806H Thermometer show a body temperature lower than 32°C (89.6°F)?
If your DeltaTRAK Thermometer is on “Surface” mode, the 32°C (89.6 °F) temperature displayed shows the external body temperature.
What to do if the DeltaTRAK DT-8806H measuring distance is too far?
If you are experiencing issues with temperature readings, ensure you maintain a distance of 5 cm to 15 cm (2 in to 5.9 in) when using the DeltaTRAK Thermometer.
What to do if DeltaTRAK DT-8806H temperature reading is hampered by hair, perspiration, etc.?
To ensure accurate temperature readings with your DeltaTRAK Thermometer, make sure that there are no obstructions, such as hair or perspiration, prior to taking the temperature.
Why DeltaTRAK Thermometer temperature is hampered by an air fulx?
An air flux can interfere with the infrared system of the DeltaTRAK Thermometer. Make sure there is no air flux present to ensure accurate readings.
Identifies the infrared sensor component of the thermometer.
Describes the Liquid Crystal Display screen used for readings and indicators.
Explains how to select between Body and Surface temperature modes.
Details the function of the down button for navigation and adjustments.
Details the function of the up button for navigation and adjustments.
Explains the function of the mode button for changing settings and functions.
Describes the trigger mechanism used to initiate temperature measurement.
Indicates the location and function of the battery compartment cover.
Shows the symbol indicating the thermometer is in Surface measurement mode.
Shows the symbol indicating the thermometer is in Body measurement mode.
Explains the main display area showing temperature and other data.
Indicates the battery status or low battery warning.
Shows the current memory log number for stored readings.
Refers to the display of previously recorded temperature measurements.
Indicates the unit of temperature measurement displayed on the screen.
Shows the symbol indicating the buzzer function is active or inactive.
Indicates compliance with EU medical device directives.
Denotes compliance with FCC regulations for electronic devices.
Specifies the power requirement, typically 2x 1.5v AA batteries.
Classifies the equipment's protection against electric shock.
Advises on proper battery recycling for environmental protection.
Symbol that indicates the current measurement mode (Body or Surface).
Alerts the user to consult accompanying documents for important information.
Instructions for installing batteries and allowing the device to warm up.
Explains the short delay upon activation after long periods of inactivity.
Details the procedure for measuring forehead temperature accurately.
Describes how to take temperature behind the ear lobe when needed.
How to switch between Celsius and Fahrenheit temperature units.
Procedure for setting the temperature alarm threshold.
How to adjust the thermometer's reading for accuracy differences.
How to enable or disable the audible buzzer notification.
Instructions on how to exit the device's settings menu.
Addresses the screen displaying a temperature lower than 32°C (89.6°F).
Explains when the screen displays 'HI' indicating a measurement above range.
Explains when the screen displays 'LO' indicating a measurement below range.
The DeltaTrak DT-8806H Non-Contact Forehead Infrared Thermometer (Model 15004) is a device specifically designed for measuring human body temperature without contact, regardless of room temperature. It can also be used to measure the surface temperature of objects like baby bottles, baths, or rooms.
This non-contact infrared thermometer provides precise measurements of temperature. It operates by detecting infrared energy emitted from the forehead or other surfaces. The device offers selectable "Body" and "Surface" modes to cater to different measurement needs. It includes an alarm function that can be set to a specific temperature threshold, with a default of 38°C (100.4°F). The thermometer automatically holds data and powers off to conserve battery life. It features an automatic selection range and a display resolution of 0.1°C (0.1°F), with a backlight LCD display for easy reading. The device stores up to 32 points of temperature data in its memory.
The thermometer is designed for ease of use. Before first use or after changing batteries, it's recommended to wait at least 10 minutes for the device to warm up and acclimate to ambient temperature for 15 to 20 minutes. For body temperature measurement, the device should be aimed at the forehead from a distance of 5 cm to 15 cm (2 in to 5.9 in). It's crucial to ensure no hair, perspiration, cosmetics, or clothing covers the forehead as these can affect accuracy. If the room temperature is significantly different or there is perspiration, temperature can also be taken behind the ear lobe, ensuring the area is clear.
The device allows users to select between Celsius (°C) and Fahrenheit (°F) units. This is done by pressing the "MODE" button for 2 seconds until F1 is displayed, then using "DOWN" for Celsius or "UP" for Fahrenheit. The alarm threshold can be adjusted in the F2 menu, accessible by pressing "MODE" twice after F1. The "UP" and "DOWN" buttons increase or decrease the threshold by 0.1°C (0.1°F). A "Total Difference" (F3) function allows users to adjust the thermometer's reading to match a conventional thermometer, which is particularly useful for calibration in varying environmental conditions. This function is only effective in "Body" mode. The buzzer can be turned ON or OFF in the F4 (F3) menu, with a sound icon indicating it's on. To exit the setting mode, press the "MODE" button until the screen turns off.
The thermometer automatically stores the last 32 temperature measurements, which can be recalled using the "UP" or "DOWN" buttons. To delete all memory, power off the device, then press "UP" and "DOWN" together for two seconds, change the order number to 0, and press "MODE".
To ensure the longevity and accuracy of the device, several maintenance guidelines are provided:
The DT-8806H is guaranteed for 40,000 measurements and conforms to several medical device and electrical equipment standards, including EN12470-5, ASTM E1965-1998, EN 980, EN 1041, EN 60601-1, and EN 60601-1-2. It has been tested for EMC compliance but should be used in environments free from high electromagnetic interference.
General| Brand | DeltaTRAK |
|---|---|
| Model | DT-8806H |
| Category | Thermometer |
| Language | English |
To Next Page
