What to do if the temperature sensor or wiring is open on my Deltech Dehumidifier?
To address an open temperature sensor or wiring in your Deltech Dehumidifier, replace the sensor or repair the wiring.
What to do if the temperature sensor or wiring is shorted on my Deltech Dehumidifier?
To address a shorted temperature sensor or wiring in your Deltech Dehumidifier, replace the sensor or repair the wiring.
Covers pressurized devices, electrical, and breathing air safety.
Inspect for damage upon delivery and during unpacking.
Proper handling during transport and guidelines for storage conditions.
Select a suitable location with adequate ventilation and clearance for air flow.
Securely mount the dryer and connect air and water piping correctly.
Ensure proper electrical wiring according to schematics.
Understand the operation and function of the electronic demand drain.
Understand minimum/maximum pressure, temperature, and ambient conditions.
Step-by-step guide for initial energization, setup, and operation.
Using RS-485, USB, and Ethernet for data logging, control, and updates.
Procedures for initial startup, scheduling, and verifying operational status via controller.
Configure dryer settings, email alerts, and monitor via Modbus TCP.
Details on registers for dryer status, parameters, and inputs.
Specific values for status, alarm flags, model, and mode registers.
Regular checks including condenser cleaning, drain testing, and temperature monitoring.
Periodic service including terminal checks and filter cartridge replacement.
Guides for water presence, pressure drop, and checkpoint faults.
Solutions for high discharge temp, low pressure, drain issues, and sensor faults.
Method for calculating dryer capacity using operating conditions and correction factors.
Specifications for air system, refrigeration, condensers, and electrical data.
Overview of status and setup menus for monitoring and configuring dryer operations.
Steps to configure IP address, subnet mask, and gateway for network connectivity.
Table detailing alarm triggers, conditions, and response actions.
Table listing physical dimensions and weights for all dryer models.
Visual representations of dryer dimensions and connection locations.
Electrical diagrams showing power, components, and control circuits for Model 800.
Electrical diagrams for 1000/1250 models, covering power, components, and control.
Electrical diagrams for 1500/1750 models, showing dual compressors and control.
Electrical diagrams for Model 3000, illustrating multiple compressors and control circuits.
Wiring details for transformer packs converting 575V to 460V.
Wiring details for transformer packs converting 230V to 460V.
Labeled diagrams illustrating the location of components on air-cooled units.
Information on maintenance kits and a detailed list of replacement part numbers.
Labeled diagrams showing the location of components on water-cooled units.
Details on maintenance kits and a comprehensive list of replacement part numbers.
Diagrams and part numbers for various cabinet panels used on the units.
Details regarding product warranty coverage, exclusions, and service authorization.
Information on the duration of warranty coverage and limitations on liability.
General| Category | Dehumidifier |
|---|---|
| Model Series | DES Series |
| Manufacturer | Deltech |
| Type | Desiccant |
| Airflow Capacity | Varies by model |
| Airflow | Varies by model |
| Moisture Removal Capacity | Varies by model |
| Moisture Removal Capacity (at 60% RH, 27°C) | Varies by model |
| Operating Temperature Range | 34° to 104°F |
| Power Supply | Varies by model |
| Power Consumption | Varies by model |
| Refrigerant | N/A (desiccant system) |
| Noise Level | Varies by model |
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
| Control | Digital |
| Applications | water damage restoration |
To Next Page
