3
211 338 44.indd / 081019
Further documents:
DRC-MP D3 operating instructions 211 270 44 719 IS 975
DRC-DR D3 operating instructions 211 267 44 719 IS 975
8 Using DRC radio controls 42
8.1 Safety warning 42
8.2 Personnel requirements 42
8.3 Check before starting work 43
8.4 Crane operation/Run 44
8.5 Taking the equipment out of service at the end of the shift (standby or
switching off) 48
8.6 Radio control system operating statuses 49
9 Information menu in connection with DRC-DR 51
9.1 Activating the information menu 51
9.2 Selecting the information source 51
9.3 Activating the crab selection screen 51
9.4 Start screen 51
9.5 Navigating in the information menu 51
9.6 Information menu data 52
10 Fault elimination 53
11 Disposal 56
11.1 Personnel requirements 56
11.2 Disposal of the radio control system 56
12 Information 57
12.1 After-sales service 57
P1 Menu for programming the DRC-MJ D3 hand-held transmitter parame-
ters 60
P1.1 Activating the menu 60
P1.2 Further information on the parameters 61
P1.3 Displaying and entering reversal of the direction of the lifting/lowering mo-
tion, parameter code 507 63
P1.4 Activating the electronic gate for the left joystick, parameter code 508 64
P2 FCC and Industry Canadian information 60
P2.1 FCC information 60
P2.2 Industry Canadian information 61
To Next Page
Loading...
Need help?
General
