© DENAFRIPS CO. LTD. & VINSHINE AUDIO PTE. LTD. (SINGAPORE)
ALL RIGHTS RESERVED
3. OPERATING INSTRUCTION
3.1 Quick Start Guide
Package Contents
ATHENA PREAMP
Remote Control
– CR2032 battery is required
Connection
Power: Use a proper AC power cord, connect it to the PREAMP power socket.
Inputs: The PREAMP comes with 4 switchable inputs (XLR1/XLR2/XLR3/RCA), and 1
volume controlled non-switchable input (XLR4). If you only have a single source, you
may use XLR4 for purest sound quality.
Output: All outputs are active simultaneously. Connect the output to the power
amplifier
WARNING
Please power off all equipment prior connection/disconnection of cables.
To Next Page
Loading...