12
USB Driver Installation
USB Driver Installation - The USB driver is required for Windows operating systems (win10 or above
only, for versions below win10 refer to the official website for detailed instructions). The USB driver is
licensed by THESYCON and is designed to provide the highest quality audio playback for computer
audio systems.
Note: Mac and Linux operating systems do not require a USB driver.
1. Do not connect the USB cable from your computer to the DAC. unplug it before the USB driver
is installed.
2. Download the driver from the support page at https://www.denafrips.com/download-thesycon.
3. Double-click the driver on your computer → Follow the on-screen instructions to complete the
installation
4. Restart your computer → Connect the USB cable to the DAC → Find the driver icon in the
bottom right corner of your computer
5. Click on the driver icon → select USB Input
6. Click on Playback Devices in the bottom right corner of your computer
→ Select DENAFRIPS USB DAC as the default sound card for Windows OS.
7. Driver, finish
Installation Guide
To Next Page
Loading...
