8
F. Source Selection
USB, COAX (coaxial), OPT and I2S. Press these buttons
to select the input source and the corresponding source
indicator will light up. If a device has more than one audio
source input, press the corresponding audio source input
button. indicator lights up to indicate successful switching.
Function Setting procedure
E. Selection
Oversampling Rate /
Original code rate
1. Press the NOS/OS button.
2. NOS indicator on = original code rate,
NOS indicator off = oversampling rate.
1. Press the MUTE button once to enter configuration mode.
2. Switch the COAX button momentarily (within 3s) for DSD left
and right channel swap.
D. DSD left and right channel
switching
To Next Page
Loading...
