DENAGO commute 2 - Page 16

COMMUTE 2
PEDALS6
Right pedal is applied to drive side/side with crank and gears and threads/twist on CLOCKWISE
Left pedal is applied on NON-DRIVE side/side with disk rotors and twist COUNTER-CLOCKWISE
&RQȴUP3HGDOVDUHWLJKWHQHGDQGVHFXUH, check frequently.
1.
On Drive Side of bike select R-Right pedal.
2. Apply grease to pedal threads.
3. Insert pedal into Crank/Drive side
and start to turn CLOCKWISE.
4. Once hand tight apply pedal wrench
to pedal and tighten and secure.
Apply grease to threads on both Right pedal.
1. On NON Drive Side of bike select L-Left pedal.
2. Apply grease to pedal threads.
3. Insert pedal into Crank Arm/NON Drive side
and start to turn COUNTER-CLOCKWISE.
4. Once hand tight apply pedal wrench
to pedal and tighten and secure.
Apply grease to threads on both Left pedal.
Bicycle Grease
Packet
Pedal /
Wheel Wrench